Converta seu lama para brushless
2 participantes
:: Helimodelismo :: Helicopteros
Página 1 de 1
Converta seu lama para brushless
oi pessoal
olha ai o kit para converter o lama que usa motores classe 180, para brushless.
bom , bonito , na hobby king!!!
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=8285&Product_Name=Brushless_Conversion_kit_for_LAMA4_&__LAMA3
cineas
olha ai o kit para converter o lama que usa motores classe 180, para brushless.
bom , bonito , na hobby king!!!
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=8285&Product_Name=Brushless_Conversion_kit_for_LAMA4_&__LAMA3
cineas
Re: Converta seu lama para brushless
cara, já tinha visto isso, mas se reparar nos comentários dos compradores, a galera não ficou feliz não!!!
Daniel- Mensagens : 150
Data de inscrição : 16/04/2009
Re: Converta seu lama para brushless
This looked like a real nice idea, but I cannot get it to work. Tried with both an E-flite and E-sky 4-in-1. The motors will twitch when I connect the battery, but do not react to the throttle. I can tell that power is getting to the converter, as a red LED illuminates. Also, the motors do not have pinion gears and the shafts may be too short for the upper rotor gear.
Customer Rated
Customer
Unfortunately my experience was the same as the above. Could not get it to work with either E-sky or E-flite 4-in-1s. At power-up the motors would not turn. No instructions - but none really needed (yet it still should be included - even if just pictures). However, I plan to keep the components and will try to pin-point the bad parts and replace them. I'm also sure one of the two esc's were bad as only one motor would twitch at power-up.
___________________
Customer Rated
Customer
right, also motors don't work separately as well. I mean regulators might be a reason.
Still these converters are rather a value for me, at least I can use them with more powerful motors and regulators.
If you are looking for this set to WORK as it is, it WON'T! There is really some production malfunction.
___________________
Customer Rated
Customer
Unfortunately my experience was the same as the above. Could not get it to work with either E-sky or E-flite 4-in-1s. At power-up the motors would not turn. No instructions - but none really needed (yet it still should be included - even if just pictures). However, I plan to keep the components and will try to pin-point the bad parts and replace them. I'm also sure one of the two esc's were bad as only one motor would twitch at power-up.
___________________
Customer Rated
Customer
right, also motors don't work separately as well. I mean regulators might be a reason.
Still these converters are rather a value for me, at least I can use them with more powerful motors and regulators.
If you are looking for this set to WORK as it is, it WON'T! There is really some production malfunction.
___________________
Daniel- Mensagens : 150
Data de inscrição : 16/04/2009
:: Helimodelismo :: Helicopteros
Página 1 de 1
Permissões neste sub-fórum
Não podes responder a tópicos
|
|